CPE 135A
Properties SWC-YY CPE135A has multiple physical property with good low-temperature flexibility and better tearing strength. Its dissolved parameter are nearly the same as PVC and it has good affinity with PVC. Under right procession condition, it can form a network composition inside of hard PVC finished products and give them good normal, low-temperature flexibility and impact strength
Specification
Item | Index |
Chlorine content | 35+/-1 % |
Heat stable time (165℃) | ≥8 |
Volatile Matter content | ≤0.3% |
Remains crystallinity | ≤2% |
Tearing Strength | ≥8.0 Mpa |
Residue 0.441mm bore diameter
on sieve 0.356mm bore diameter | ≤0.5% ≤10% |
Shore Hardness (A) | ≤58 |
Ca content | ≤1.2% |
Apparent Density | ≥55 g/ml |
Impurity Particle PC/(25×60)cm2 | <3 |
Remark: Special requirements from customers could be adjusted to above index SWC-YY CPE 135A has been coated by 3% active Calcium Carbonate if not otherwise specified. Theoretical content of Calcium is 1.2% |
Application
Mainly used for producing PVC profiles, U-PVC waterpipe & sewer pipe, cold curved pipe line, PVC blowing board and PVC extrusion board.
Packing and Storage
Packing In 25kgs net plastic woven bag
Quantity: 16mts with pallet in 20Fcl and 18mts without pallet
Safety Information
Non-hazardous for air, sea and road freight.
